Home  > INFO CENTER  > News  >  Outdoor billboard replacement screen skills and methods

Outdoor billboard replacement screen skills and methods

2019-08-09

The outdoor billboard replacement screen is more complicated than the traditional billboard change screen, so it is recommended to have a higher requirement in the quality of the spray painting: firstly, the screen has high precision, waterproof and UV-resistant strength, and guarantees no fading for one year; secondly, the adhesive material It is necessary to consider tearing when replacing the screen. Some customers are cheap, the screen fades in less than three months, the material is not sticky or the corners are curled up, or the material is too sticky to tear, which is caused by the customer changing the painting. A lot of inconvenience.

1, simple paste method:

Use scaffolding or bamboo scaffolding (shelf for outdoor high-rise building exterior wall construction):

a: From left to right, tear off the original picture on the billboard on the column from top to bottom;

b: Check if there is any shredded paper glue on the prism;

c: Arrange the order of the pictures to be posted on the ground and carefully number them;

d: From top to bottom, from left to right, put on a new high-precision outdoor adhesive computer painting, check the flatness of the picture, and minimize the occurrence of air bubbles;

e: Cut the gap between the two prisms and tear off the lines by using a wallpaper knife perpendicular to the prism face and from top to bottom along both sides.

YEROO-Outdoor billboard replacement screen skills and methods

After the above five steps, remove the scaffold or bamboo scaffold after inspection, completely remove the foreign matter wrapped around the prism, and finally turn on the power to restore the normal operation of the column billboard.

2. Suggested paste method:

Safe sliding combination lifting plate for cleaning high-rise building glass curtain wall (cleaning company auxiliary tool for cleaning)

a: From left to right, tear off the original picture on the billboard on the column from top to bottom;

b: Check if there is any shredded paper glue on the prism;

c: Arrange the order of the pictures to be posted on the ground and carefully number them;

d: From top to bottom, from left to right, put on a new high-precision outdoor adhesive computer painting, check the flatness of the picture, and minimize the occurrence of air bubbles;

e: Cut the gap between the two prisms and tear off the lines by using a wallpaper knife perpendicular to the prism face and from top to bottom along both sides.

After the above five steps, the foreign matter wound on the prism is removed after inspection, and finally the power is turned on to restore the normal operation of the column billboard.

The above two outdoor billboards  change the painting skills, I hope to help everyone, more product information, stay tuned!


Chat Online 编辑模式下无法使用
Chat Online inputting...
Please leave your WhatsApp number and the business manager will contact you.